How do you use the Steam Genie Maestro?

Hang the garment in an area in area that will not be affected by steam or the heat such as a shower curtain rail, or in an open doorway. Alternatively place the garment on a bed or towel
Fit one of the attachments provided, if required.
Plug the steamer in and press the power button. The blue power button light will slowly flash indicating that the steamer is heating
After about 45 seconds the power light will stay on, indicating that your steamer is ready to use
Prime the water pump by holding or locking the steam trigger until steam forms. If this is your first use this will take about a minute for steam to form
To generate steam press the steam trigger. As long as the trigger is held, steam will emit from the steamer. When the trigger is released it will stop.
With your free hand keep the fabric taut. Steam the garment with slow, downward strokes keeping the head of the steamer in contact with the fabric.
When you have finished press and hold the power button until the blue light goes out