Groove Kettle Grey
High on style, low on energy usage. The Russell Hobbs Groove Kettle is bringing a touch of glamour and a spot of energy-saving to kitchens everywhere.
Save 10% when you buy the Groove grey kettle and toaster set here
High on style, low on energy usage. The Russell Hobbs Groove Kettle is bringing a touch of glamour and a spot of energy-saving to kitchens everywhere.
Save 10% when you buy the Groove grey kettle and toaster set here
Switched on style.
Textures never go out of style and this season Russell Hobbs Grey Groove Kettle with its chic, tactile finish and gold accents could be making a fashionable statement on your kitchen countertop. Its impeccable design and wipe-clean housing means it will always look its best. It’s been designed with all the functions and features that you’d expect from Russell Hobbs, including 1.7 litre capacity, perfect pour spout, water window and rapid boil markers. Need a hot drink straightaway? It takes a single cup of water to 100°C in just 44 seconds* and uses 66% less energy**. So, it’s stylish, functional and energy conscious too!
The stylish Groove Kettle defines the move toward textures in interior design and extends this trend to kitchens. With its shiny wipe-clean housing and gold-coloured accents, the modern Groove Kettle is a statement of good taste.
Pour water smoothly from kettle to cup with no messy drips on the countertop or hot water splashes from the spout.
A clear water window with cup markings allows you to see how much water is in the kettle.
In a hurry? It takes just 44 seconds to heat one cup from tap to 100°C boil.
*One cup is equal to 236ml
**Boiling 1 cup (236ml) vs 1 litre
Register your product to benefit from an extended warranty on top of our standard manufacturer warranty as well as access to exclusive content.
We will repair or replace products that are defective within the warranty period where the product is used and maintained in accordance with the instructions. Spare parts for this product are covered by a one year guarantee. Your statutory rights are not affected.
Model Number | 26382 |
---|---|
Colour | Grey |
Height (mm) | 245 |
Wattage | 3000 |
Total Capacity | 1.7 Litres |
Perfect Pour Spout | Yes |
Quiet Boil | No |
Rapid Boil Zone | No |
No, the kettle is intended for heating water only. Do not use it to heat up any other liquids
The water in this kettle is heated up rapidly, which causes the noise. This is a normal phenomenon and there is nothing wrong with your kettle.
Clean the outside of the kettle and the base with a warm damp soft cloth. Do not let the moist cloth come into contact with the cord, the plug and the connector of the base.
Never immerse the kettle or its base in water and do not use abrasive cleaning agents such as scourers to clean the kettle.
Depending on the hardness of the water where you live, small spots may appear on the heating element of your kettle when you use it. This is the result of scale build-up on the heating element and on the inside of the kettle over time.
The harder the water, the faster scale builds up. Scale can occur in different colours and although scale is harmless, too much scale can influence the performance of your kettle. Descale your kettle regularly to pro long the life of your kettle.
While the kettle will still function without the anti-scale filter, the flow of the pour may not be as smooth and there may even be a little ‘spitting’ during the boil with a full kettle. And of course, the function of filtering out minerals from getting into the cup will not be there. We would recommend always using the anti-scale filter. While some are metal, many of our kettles use a plastic anti-scale filter – these are all BPA-free and food safe, and will not affect the water taste.
Yes, you have to descale your kettle regularly. Minerals present in tap water will cause scale to build up inside your kettle when water is heated.
Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life.
Regular descaling prolongs the life of the kettle. We recommend that you descale regularly - at least monthly.
You must only use a descaler that is suitable for use in plastic products. If you use a descaling agent, follow the instructions on the bottle or package to descale your kettle.
This problem may have multiple causes:
The appliance is not connected to the mains.
The dry-boil protection has been activated.
The kettle needs to be descaled.
Below you can find the solutions for each of these causes.
Solution Cause 1: The appliance is not connected to the mains. Check if the plug of the kettle has been inserted properly into the wall socket and if the wall socket is working.
Solution Cause 2: The dry-boil protection has been activated. The dry-boil protection is a safety feature that automatically switches off the kettle. It will be activated if the kettle is switched on with insufficient or no water inside or if all of water inside the kettle has evaporated during operation.
To reset the dry-boil protection, you have to lift the kettle from its base and fill it with cold water. When you place the kettle back on the base, the dry-boil protection is reset and you can switch the kettle on again.
Solution Cause 3: The kettle needs to be descaled. Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life.
Regular descaling prolongs the life of the kettle. We recommend that you descale regularly - at least monthly.
You must only use a descaler that is suitable for use in plastic products. If you use a descaling agent, follow the instructions on the bottle or package to descale your kettle.
If the above solution(s) did not help to solve your problem, please contact the Russell Hobbs Consumer Service Department on 0345 658 9700.
This indicates that the kettle has been filled beyond the maximum level indication.
For safety reasons, you should never fill the kettle beyond the MAX indication on your water level indication window.
If you find some condensation or a few drops of water on the base, this is not a manufacturing defect but a normal occurrence.
However, if you see more water than just a few drops on the base or under the base, please contact the Russell Hobbs Consumer Service Department on 0345 658 9700.
Try descaling the kettle according to the descale procedure. Rinse carefully afterwards.
If this does not help, please contact the Russell Hobbs Consumer Service Department on 0345 658 9700.
If the water boiling procedure has slowed down, the heating element of the kettle is probably covered with scale. Descale the kettle to remove the scale and revert back to quick boiling.
You must only use descaler suitable for use in plastic products. If you use a descaling agent, follow the instructions on the bottle or package to descale your kettle.
Regular descaling prolongs the life of the kettle. Kettles should be descaled regularly - at least monthly.
Contact your local or regional water board for information on the hardness of your tap water. If you use the kettle more than 5 times a day, you may have to descale it more often.
Regularly descaling your kettle will help to pro long the life of your kettle, keep the inside of the kettle clean and reduce boiling times which will then reduce energy consumption.
No, to preserve the environment please hand it in at an official collection point for recycling or you can return to us and we will recyle it for you.
Our addresses for recycling is; WEEE Recycling Department, Russell Hobbs Ltd, Heathmill Road, Wombourne, Wolverhampton WV5 8AQ or WEEE Recycling Department, Russell Hobbs Ltd, Fir Street, Failsworth, Manchester, M35 0HS.
This kettle is equipped with boil-dry protection. The kettle will automatically switch off if it is accidentally switched on when there is no water or not enough water in it.
To use it again lift the kettle from its base and fill it with cold water to reset boil-dry protection. The kettle is now ready for use again.